To Export The Logic Analysis System's Display To A Pc - Agilent Technologies E5900B User Manual

Example
1 On the PC, start the X terminal emulator software.
2 Start a telnet connection to the logic analysis system.
On a UNIX workstation, you could use the following commands to export the
display of a logic analysis system named "mylogic":
$ xhost +mylogic
$ telnet mylogic
Trying...
Connected to mylogic.mycompany.com.
Escape character is '^]'.
Local flow control on
Telnet TERMINAL-SPEED option ON
Agilent Logic Analysis System
Please Log in as: logic [displayname:0]
login: logic
Connection closed by foreign host.

To export the logic analysis system's display to a PC

By exporting the logic analyzer's display, you can see and use the logic analysis
system's windows on the screen of your PC. To do this, you must have telnet
software and an X terminal emulator installed on your computer. The
following instructions use the Reflection X emulator from WRQ, running on
Windows 95, as an example.
To start Reflection X, select the Reflection X Client Startup icon.
Log in as "logic".
For Reflection X, enter the following values in the Reflection X Client Startup
dialog:
a In the Host field, enter the LAN name or IP address of the logic
analysis system.
b In the User Name field, enter "logic".
c Leave the Password field blank.
d Leave the Command field blank.
e Select Run to start the connection.
The logic analysis system will open a Session Manager window on your display.
Agilent Technologies Emulation for the PowerPC 400/600/700
Chapter 8: Using the Emulation Probe
Exporting the Logic Analysis System's Display
91