If You Need To Obtain Help; To Clean The Instrument - Agilent Technologies E5900B User Manual

Chapter 12: Troubleshooting the Emulation Probe
Returning Parts for Service

If you need to obtain help

If, after following the troubleshooting steps and looking through the other
sections in this chapter, the emulation probe still is not working:
1 Write down the target processor version, the emulation probe firmware
version, and the type of emulation probe (E5900A or E5900B).
2 Call your nearest Agilent Technologies sales or service office.
To locate a sales or service office near you, go to http://www.tm.agilent.com
and select Contact Us.

To clean the instrument

If the instrument requires cleaning:
1 Remove power from the instrument.
2 Clean the instrument using a soft cloth that has been moistened in a
mixture of mild detergent and water.
3 Make sure that the instrument is completely dry before reconnecting it
to a power source.
184 Agilent Technologies Emulation for the PowerPC 400/600/700