Using The Command Line Interface From The Logic Analysis System - Agilent Technologies E5900B User Manual

Using the command line interface from the logic
analysis system
1 Connect to the emulator. See "Using the Emulation Probe" on page 81
for step-by-step instructions.
2 From the Run Control menu bar select Window,
then select the emulator,
and select Command Line....
3 The command line window will be displayed. You can enter commands
in the "Command Input" field of the Command Line window.
Agilent Technologies Emulation for the PowerPC 400/600/700
Chapter 8: Using the Emulation Probe
Using the Emulation Probe Command Line Interface
89