To Update Firmware For An Emulation Probe Using The Setup Assistant - Agilent Technologies E5900B User Manual

Chapter 10: Updating Firmware
Updating Firmware With a Logic Analysis System
To update firmware for an emulation probe using the
Setup Assistant
The Setup Assistant is an online tool for connecting and configuring your logic
analysis system for microprocessor and bus analysis. The Setup Assistant is
available on Agilent 16700-series logic analysis systems.
This menu-driven tool will guide you through the connection procedures for
connecting the logic analyzer to an analysis probe, an emulation probe, or
other supported equipment. It will also guide you through connecting an
analysis probe to the target system.
1 Install the processor support package from the CD-ROM. See page 62.
2 Start the Setup Assistant by selecting its icon in the system window.
3 Follow the instructions displayed by the Setup Assistant.
140 Agilent Technologies Emulation for the PowerPC 400/600/700