To Update Firmware Using The Emulation Control Interface - Agilent Technologies E5900B User Manual

To update firmware using the Emulation Control
Interface
1 End any run control sessions which may be running.
2 Install the processor support package from the CD-ROM. See page 62.
3 Open the Update Firmware window.
For an emulation module: In the system window, select the emulation module
and select Update Firmware....
For an emulation probe: In the Workspace window, drag the emulation probe
icon onto the workspace then select Update Firmware....
4 In the Update Firmware window, select the firmware to load into the
emulation module.
5 Select Update Firmware.
In about 80 seconds, the firmware will be installed and the screen will update
to show the current firmware version.
Agilent Technologies Emulation for the PowerPC 400/600/700
Chapter 10: Updating Firmware
Updating Firmware With a Logic Analysis System
139