Section 1: Safety Regulations & Introduction; Following Operating Instructions; Obligations Of Operator; Obligations Of Personnel - ECD 100-194 EN81 Manual

S A F E T Y R E G U L A T I O N S & I N T R O D U C T I O N
Section 1: Safety Regulations & Introduction
Section 1.1 Safety Regulations
Elevator controllers and other electrical components can cause serious harm or death if installation guides are not
met. It is the responsibility of the installer of our equipment to ensure that once installed, the equipment does not
pose any threat, danger or hazard.
Installation of this equipment shall be done in accordance with AS1735 for Australia and with all applicable local
codes.
Section 1.2 Obligations and Liability
1.2.1

Following operating instructions.


In order to ensure safe handling and problem free operation of this equipment, it is absolutely
essential for the relevant personal to be fully acquainted with the relevant safety regulations.
 These operating instructions contain the most important information for operating the machine correctly
and safely.
 These operating instructions, in particular the safety regulations, must be observed by all those persons
who work on the equipment.
 Furthermore, all locally applicable rules and regulations relating to accident prevention and installation
must be observed.
1.2.2

Obligations of operator.

The operator undertakes to allow only those persons to work on the equipment who
 Are fully acquainted with the basic regulations relating to safety in the workplace and accident prevention
and to have been trained in handling the equipment.
 Have read the safety regulations and the warning notices contained in these the operating instructions.
 Regular checks are conducted to ensure that personnel perform their duties with safety considerations
foremost in their minds.
1.2.3

Obligations of personnel.

All personnel charged with working on the machine undertake prior to starting work to
 Observe the basic regulations relating to safety in the workplace and accident prevention.
 Read the operating instructions, in particular the safety regulations, and confirm by way of their signature
that they have understood them.
4
Section