Section 1.1 Safety Regulations; Section 1.2 Obligations & Liability; Following Operating Instructions; Obligations Of Operator - ECD Brake Board Operation Manual

Section 1.1 Safety Regulations

 Installation of this equipment shall be done in accordance with all applicable local
codes
 Elevator controllers and other electrical components can cause serious harm or
death if installation guides are not met. It is the responsibility of the installer of our
equipment to ensure that once installed, the equipment does not pose any threat,
danger or hazard.
Section 1.2 Obligations & Liability

1.2.1 Following operating instructions.


In order to ensure safe handling and problem free operation of this
equipment, it is absolutely essential for the relevant personal to be fully
acquainted with the relevant safety regulations.
 These operating instructions contain the most important information for
operating the equipment correctly and safely.
 These operating instructions, in particular the safety regulations, must be
observed by all those persons who work on the equipment.
 Furthermore, all locally applicable rules and regulations relating to accident
prevention and installation must be observed.

1.2.2 Obligations of operator.

The operator undertakes to allow only those persons to work on the equipment
who
 Are fully acquainted with the basic regulations relating to safety in the
workplace and accident prevention and to have been trained in handling the
equipment.
 Have read the safety regulations and the warning notices contained in these
the operating instructions.

1.2.3 Obligations of personnel.

All personnel charged with working on the machine undertake prior to starting
work to
 Observe the basic regulations relating to safety in the workplace and
accident prevention.
 Read the operating instructions, in particular the safety regulations, and
confirm by way of their signature that they have understood them.
4