Section 6. Motion; Motion Control Outputs; Drive Settings And Their Output Status - ECD 100-194 EN81 Manual

Section 6. Motion

Motion Control Outputs

Drive settings and their output status.

The controller may output to various different drives as per the list below depending on the DRV EEPROM
setting.
The following diagrams only indicate the drive outputs but do not show re-levelling functions and timing.
DRV...EEPROM...Drive control type.
GMV 3010EN
Setting "00"
Note:
1. On inspection, SP3 turns on for inspection speed.
2. PRV input must be ON, prior to a run.
55
Section
700ms
100ms