1P/12P - Position Output; 1U/11U - Up Hall Call Input / Output - ECD 100-194 EN81 Manual

I N P U T S – O U T P U T S

1P/12P - PosItion output

Transistor outputs 1P-12P
Position outputs are used for indication of lift position.
This signal is the advanced lift position count
Note: The LCD displays the actual and not the advanced position (PI) count.
The PI output may be in decimal, binary or grey code depending on the PI Setting
See also EEPROM settings, PI
1U/11U – Up Hall Call input / output
input/darlington output
1U – 11U inputs turn on when the up hall call at that floor is entered
1U – 11U output turns on for up the hall call entered indication (tell-tale light)
48