ECD 100-194 EN81 Manual page 59

VF Drive Type 1. KEB, B&F, Zetadyn, C.T.
Setting "03"
Note:
1. On inspection, SP3 turns on for inspection speed.
2. PRV input must be ON, prior to a run.
3."PRV" turns off during entire run and
becomes active to complete the run.
4. On inspection UF and DF turn off.
5. SP2 turns on for intermiediate speed (MSL=01 only)
6. US/ DS used for terminal speed check on lifts above 1m/s
2 Speed AC
Setting "04"
Note:
1. On inspection, SP3 turns on for inspection speed.
2. PRV input must be ON, prior to a run.
57