Section 6. Motion; Motion Control Outputs; Drive Settings And Their Output Status - ECD 100-181 Manual

M O T I O N

Section 6. Motion

Motion Control Outputs

Drive settings and their output status.

The controller may output to various different drives as per the list below depending on the DRV EEProm setting.
The following diagrams only indicate the drive outputs but do not show re-leveling functions and timing.
DRV...EEPROM...Drive control type.
GMV 3010EN
Setting "00"
Note:
1. On inspection SP3 turns on for inspection speed
Section
6
700ms
100 ms