Calibration Data - wtw VWR MU 6100 H Operating Manual

MU 6100 H
Displays the calibra-
tion data
Displaying the cali-
bration data memory
Calibration evalua-
tion
ba77077e06 05/2021

9.2.6 Calibration data

The calibration record is automatically transmitted to the interface
after calibrating.
The calibration record of the last calibration is to be found under the menu item,
<OK>
/ Calibration / / Calibration record. To open it, press the
in the measured value display.
Subsequently, you can transmit the displayed calibration data to the interface,
e.g. to a PC, with the
The calibration records of the last calibration procedures are available in the
<OK>
menus, /Calibration / / Calibration data storage and
config / Data storage/ / Calibration data storage.
Menu item
Calibration /
Calibration data stor-
age / Display
or
Data storage /
Calibration data stor-
age / Display
Calibration /
Calibration data stor-
age / Output to USB
or
Data storage /
Calibration data stor-
age / Output to USB
After calibration, the meter automatically evaluates the current status of the
calibration. The evaluation appears on the display and in the calibration record.
<F2>
[USB output] key.
Setting/func-
tion
-
-
Dissolved oxygen
<CAL__>
<OK>
Explanation
Displays the calibration record.
Further options:
 Scroll through the calibration
< ><

records with
 Output the displayed calibra-
tion record to the interface with
<F2>
/[USB output].
 Quit the display with
<OK>
[Back] or .
 Switch directly to the mea-
sured value display with
<MODE>
.
Outputs the calibration records to
the interface.
key
/Storage &
>

.
<F1>
/
53