Table of Contents
Advertisement
MU 6100 H
If the memory is full
Configuring the
automatic memory
function
ba77077e06
05/2021
The following window appears if all 200 storage locations are occupied:
Warning
Data storage full. Erase?
Yes
No
Back
You have the following options:
To erase the entire memory, confirm Yes.
To cancel the storing process and switch to the measured value display,
confirm No. Then you can e.g. store the recorded data to a PC (see section
12.3.1 E
DITING THE MEASUREMENT DATA MEMORY
erase the data memory (see section 12.3.2 E
, page 79).
MEMORY
12.2 Automatic data storage at intervals
The storing interval (Interval) determines the time interval between automatic
data storing processes. With each data storage process, the current datasets
of the sensors indicated on the display are transmitted to the interface at the
same time.
<STR
1.
Press the
The menu for automatic data storing appears.
Automatic data storage
ID number
Interval
Duration
Continue
0d03h00min
0
in
15.02.2014
Back
1 Specified entire storing duration
2 Max. available storing duration
3 Graphical display of the memory usage
15.02.2014
14:15
_
>
key.
1
30 s
180 min
1d17h33m
14:15
Data memory
, page 77) and subsequently
RASING THE MEASUREMENT DATA
1
2
3
75
Advertisement
Table of Contents
