Example 2 On Navigation: Setting The Date And Time - wtw VWR MU 6100 H Operating Manual

Operation
24
General
Language:
Beep:
Illumination:
Contrast:
Switchoff time:
Temperature unit:
Stability control:
15.02.2014
Back
8. Select the required language with
9. Confirm the setting with
The meter switches to the measuring mode.
The selected language is active.
5.4.6

Example 2 on navigation: Setting the date and time

The meter has a clock with a date function. The date and time are shown in the
measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
 Current date and time
 Calibration date
 Identification of stored measured values.
Therefore, check the time at regular intervals.
After a fall of the supply voltage (empty batteries), the date and time
are reset.
The date format can be switched from the display of day, month, year
(dd.mm.yyyy) to the display of month, day, year (mm/dd/yyyy or mm.dd.yyyy).
1. In the measured value display:
Open the Storage & config menu with
The instrument is in the setting mode.
2. Select and confirm the System / Clock menu with
<OK>
.
The setting menu for the date and time opens up.
3. Select and confirm the Time menu with
The hours are highlighted.
Deutsch
Off
On
50 %
1 h
°C
On
14:15
<

<OK>
.
>< >

.
_
<OK >
.
< >< >
 
< >< > <OK>
 
and
ba77077e06
MU 6100 H
and
.
05/2021