MU 6100 H
Setting the calibra-
tion interval
ba77077e06
05/2021
Menu item
Sal correction
Salinity
Reset
11.1.6 Calibration interval
The calibration evaluation is displayed as a sensor symbol.
The sensor symbol flashes after the adjusted calibration interval has expired. It
is still possible to measure.
To ensure the high measuring accuracy of the measuring system,
calibrate after the calibration interval has expired.
The calibration interval is set to 14 days in the factory.
You can change the interval (1 ... 999 days):
1.
Open the menu for measurement settings with
2.
In the Calibration / Calibration interval menu, set the calibration interval
<
><
>
with
.
3.
Confirm the setting with
4.
Quit the menu with
Possible
Explanation
setting
Manual salt content correction for
On
concentration measurements.
Off
0.0 ... 70.0
Salinity or salinity equivalent for the
salt content correction.
This function is only available for
concentration measurements if the
manual salt content correction is
switched on.
Resets all sensor settings to the
-
delivery condition (see section
11.3.1 R
MENT SETTINGS
<OK>
.
<MODE>
.
Settings
ESETTING THE MEASURE
, page 71).
<OK>
.
-
65