MU 6100 H
ba77077e06
05/2021
options:
Switch directly to the measured value display with
Quit the display and move to the next higher menu level with
12.3.2 Erasing the measurement data memory
Erasing the measurement data memory (see section 12.3.1 E
MEASUREMENT DATA MEMORY
12.3.3 Measurement dataset
A complete dataset consists of:
ID number
Date/time
Measured values of the connected sensors
Measured temperature value of the connected sensors or manually set tem-
perature
AutoRead info: The AR indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no AR indicator.
Calibration evaluation: +++, ++, +, -, or no evaluation
12.3.4 Memory locations
The MU 6100 H meter has two measurement data memories. The measured
values recorded either manually or automatic are stored separately in indi-
vidual measurement data memories.
Data memory
Manual data storage
Automatic data storage
, page 77).
Maximum number of datasets
200
5000
Data memory
<MODE>
.
<F1>
/[Back].
DITING THE
79