wtw VWR MU 6100 H Operating Manual page 44

Ion concentration
Continuing with two-
point calibration
44
ISE
Ag
12. Thoroughly rinse the electrode with distilled water.
13. Immerse the electrode in standard solution 2.
14. When calibrating without temperature sensor:
 Measure the temperature of the standard solution using a thermom-
eter.
<F2>
 Use /[
< > <
 Use
<F2>
 Use /[
15. Set the concentration of the standard solution with
<OK>
press .
The standard solution is measured.
The measured value is checked for stability (AutoRead).
ISE
AR
16. Wait for the end of the AutoRead measurement or accept the calibra-
tion value with
The calibration display for the next standard solution appears.
ISE
Ag
2
Standard
0.0
mV
24.8
°C
0.020
mg/l
15.02.2014
12:12
⇅
] to select the setting of the temperature.
>
to set the temperature.
⇅
] to select the setting of the concentration.
0.02 mg/l
8.9
mV
24.8
°C
15.02.2014
12:12
<OK>
.
3
Standard
20.5
mV
24.8
°C
0.050
mg/l
15.02.2014
12:12
MU 6100 H
< > < >
and
ba77077e06 05/2021