Display Panel - Ricoh 4800WD Operating Instructions Manual

Getting Started
12.
Operation switch
Press to turn the power on (the On indi-
cator goes on). To turn the power off,
press it again (the On indicator goes off).
1
{ { { { Sample Copy} } } } key
13.
Press to make a single sample copy be-
fore starting a long copy run. By checking
the sample copy and making any neces-
sary changes to the image quality settings
before you make multiple copies, you can
save time and paper. See "Sample Copy",
Copy Reference.
{ { { { Start} } } } key
14.
Press to start copying or scanning. Press
to start scanning and printing in Docu-
ment Server mode.
{ { { { Clear/Stop} } } } key
15.
• Clear
Press to clear a number entered.
• Stop

Display Panel

The display panel shows machine status, error messages, and function menus.
The function items displayed serve as selector keys. You can select or specify an
item by lightly pressing them.
When you select or specify an item on the display panel, it is highlighted like
. Keys appearing as
Important
❒ A force or impact of more than 30 N (about 3 kgf) will damage the display
panel.
The copying screen is displayed as default when the power is turned on.
❖ ❖ ❖ ❖ When the lower tray (paper roll) is installed
26
Press to stop a copy job in progress.
Press to stop scanning and printing in
Document Server mode.
{ { { { #} } } } key
16.
Press to confirm values entered.
17.
Number keys
Press to enter a value, such as the number
of copies.
18.
Function keys
Press to select the following functions:
• Copy
• Document Server
• Scanner
19.
Function Status indicator
These show the status of the above func-
tions:
• Yellow: selected
• Green: active
• Red: interrupted
cannot be used.