When Characters Printed By The Endorser Are Too Light Or The Original Gets Dirty; Replacing The Ink Ribbon - Ricoh G410 Operator's Manual

5. Troubleshooting
When Characters Printed by the Endorser are
Too Light or the Original Gets Dirty

Replacing the Ink Ribbon

Caution
Replace the ink ribbon if the Endorser's printing becomes too light.
A A A A A
Turn off scanner power, and unplug the power cable from the power outlet.
B B B B B
Flip open the Endorser cover (located towards the rear of the output table), and pull
the cover out.
C C C C C
Grasp the green portion of the Endorser, and turn it in the direction indicated by the
arrow until it clicks.
30
When you pull out the plug from the socket, grip the plug to
avoid damaging the cord and causing fire or electric shock.