Getting Started; Guide To Components - Ricoh 4800WD Operating Instructions Manual

Guide to Components

❖ ❖ ❖ ❖ Front
1.
Upper output stacker
When the top original exit is selected,
originals are stacked here. See "Origi-
nal Output Locations", Copy Reference.
2.
Control panel
See p.25 "Control Panel".
3.
Original cover
This protects the original feed mecha-
nism and the exposure glass.
4.
Original cover release lever
Use to open the original cover to clear
jammed originals or to clean the ma-
chine.
5.
Front output auxiliary tray
Use to receive copy paper. When
copying rolled originals, this can also
serve as an original tray.

1. Getting Started

6.
Main power switch
Use to turn the main power on or off.
If you will not use the machine for a
long time, disconnect the power cord.
Normally, the machine should be left
on.
7.
Upper tray
Includes Tray 1 (front) and Tray 2
(rear).
8.
Lower tray (optional) or Cut pa-
per trays (optional)
The illustration shows the cut paper
trays. See p.22 "Options".
9.
Operation switch
Use to turn the power on or off. The
power indicator lights when the pow-
er is on. See p.29 "Turning On the
Power".
AGL050S
19