domainname
Use the "domainname" command to
display or configure the domain
name settings.
You can configure the Ethernet inter-
face, IEEE 1394 interface, or IEEE
802.11b interface.
❖ ❖ ❖ ❖ View settings
The following command displays
the current domain name:
msh> domainname
❖ ❖ ❖ ❖ Interface domain configuration
m s h >
"interface_name"
❖ ❖ ❖ ❖ Setting the Domain Name
msh> domainname "interface
_name" name "domain name"
• A domain name can be entered
using up to 63 alphanumeric
characters.
• The Ethernet interface and IEEE
802.11b interface will have the
same domain name.
• ip1394 can be specified only
when the IEEE 1394 interface is
installed.
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
Interface
Interface set
ether
Ethernet interface
ip1394
IEEE 1394 interface
wlan
IEEE 802.11b interface
❖ ❖ ❖ ❖ Deleting the Domain Name
msh> domainname "inter-
face_name" clear name
d o m a i n n a m e
Remote Maintenance by telnet
help
Use the "help" command to display
the available command list and the
procedures for using those com-
mands.
❖ ❖ ❖ ❖ Command list display
msh> help
❖ ❖ ❖ ❖ Display of procedure for using com-
mands
msh> help "command_name"
hostname
Use the "hostname" command to
change the machine name.
❖ ❖ ❖ ❖ View settings
msh> hostname
❖ ❖ ❖ ❖ Configuration
msh> hostname "interface
_name " name "machine_name"
• Enter the machine name using
up to 63 alphanumeric charac-
ters.
• You cannot use a machine name
starting with "RNP" or "rnp".
• The Ethernet interface and IEEE
802.11b interface will have the
same machine name.
• ip1394 can be specified only
when the IEEE 1394 interface is
installed.
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
Interface name
Interface configured
ether
Ethernet interface
ip1394
IEEE 1394 interface
wlan
IEEE 802.11b interface
3
49