Accessing User Tools (Copier Features); Changing Default Settings - Ricoh 4800WD Operating Instructions Manual

Accessing User Tools (Copier Features)

This section is for key operators in
charge of this machine. You can
change or set the machine's default
settings.
Note
❒ Be sure to exit User Tools and re-
turn to the initial copy display af-
ter all settings are made. This
section describes system settings
you can set for the copier function.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Clear
Modes} } } } key is pressed.
Reference
For details about System Settings,
see "User Tools Menu (System Set-
tings)", General Settings Guide.

Changing Default Settings

A A A A
Press the { { { { User Tools/Counter} } } } key.
The User Tools main menu ap-
pears.
Accessing User Tools (Copier Features)
Note
❒ When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, the au-
thentication screen will be dis-
played. Enter your login name
and login password, and then
press [Login].
B B B B
Press [Copier / Document Server Fea-
tures].
The Copier / Document Server
Features menu is displayed.
C C C C
Select the menu you want to make
settings.
The setting display for each menu
is displayed.
Reference
p.75 "User Tools Menu (Copier
/ Document Server Features)"
D D D D
Change settings by following the
instructions on the display panel,
and then press [OK].
AHD101S
4
81