Ricoh 4800WD Operating Instructions Manual page 328

Connecting and Setting Up
To enter the user name and password
When [On] or [High Security] is selected
for the authentication setting, use the
administrator account name and
password. Do not enter the adminis-
trator account name and password
2 when using authentication for each
individual or each search.
A A A A
Press [T T T T Next].
B B B B
Press [Change] under [User Name].
C C C C
Enter the user name, and then
press [OK].
Note
❒ Procedures for the user name
setting differ depending on
server environment. Check
your server environment before
making the setting.
• Example setting procedures:
Domain Name\User Name
User Name@Domain Name
CN=Name, OU=Department
Name, DC=Server Name
D D D D
Press [Change] under [Password].
E E E E
Enter the password, and then press
[OK].
36
Note
❒ The user name and password
are required for administrator
access to the LDAP server.
❒ You can set the user name and
password in this machine's Ad-
dress Book to allow individual
authentication access to the
LDAP server. Use Administra-
tor Tools to select the user name
and password you want to use.
For details, see General Settings
Guide.
To test the connection
Access the LDAP server to check the
proper connection is established.
Check authentication works accord-
ing to the authentication settings.
A A A A
Press [Connection Test].
A connection test is carried out.
B B B B
Press [Exit].
Note
❒ If the connection test fails, check
your settings and try again.
❒ This function does not check search
conditions or the search base.
To set search conditions
You can enter an attribute as a typical
search keyword. Using the entered at-
tribute, the function searches the
LDAP server's Address Book.
A A A A
Press [T T T T Next]twice.