Ricoh 4800WD Operating Instructions Manual page 207

G G G G
Click [OK].
[Installed] appears under [Certificate Status] to show that a server certificate for
the machine has been installed.
H H H H
Log off from the machine.
Enabling SSL
After installing the server certificate in the machine, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
A A A A
Open a Web browser.
B B B B
Enter "http://(machine's-address)/" in the address bar to access the ma-
chine.
C C C C
Log onto the machine.
The network administrator can log on.
Enter the login user name and login password.
D D D D
Click [Configuration], click [Security], and then click [SSL/TLS].
The [SSL/TLS] page appears.
E E E E
Click [Enable] for [SSL/TLS].
F F F F
Click [Apply].
The SSL setting is enabled.
G G G G
Log off from the machine.
Note
❒ If you set [Permit SSL / TLS Communication] to [Ciphertext Only], enter "ht-
tps://(machine's address)/" to access the machine.
Protection Using Encryption
4
41