Loading Cut Paper - Ricoh 4800WD Operating Instructions Manual

Loading Cut Paper

Note
❒ When you load paper of size that cannot be detected automatically, select the
paper size in System Settings. See p.63 "Tray Paper Size: Tray 3, Tray 4 (when
Cut Paper Trays are installed)".
- When using translucent paper -
- -
Note
❒ Load the translucent paper into Tray 4.
AGL021S
Make sure to set the side guides before loading paper.
Note
❒ After loading paper into the tray, make sure the paper is placed straightly and
the side guides are set securely onto it.
Loading Paper
6
AHD028S
107