Ricoh 4800WD Operating Instructions Manual page 2

Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be li-
able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-
ating the machine.
Notes:
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Notes:
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, the supplier recommends that you use genuine toner from the supplier.
The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from the supplier with your office products.
Power Source
120V, 60Hz, 20A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see P.122 "Power Connection".
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
a means POWER ON. a
a a
c c means STAND BY. c c
In accordance with IEC 60417, this machine uses the following symbols for the anti-humidity heater
switch:
a means POWER ON. a
a a
b means POWER OFF. b b b
Copyright © 2005