Ricoh 4800WD Operating Instructions Manual page 433

Program/Delete User Stamp
Note
❒ The range of stamp images for
readability is 10–432 mm high
(0.4"–17") and 10–297 mm wide
(0.4"–11"). However, if the value
exceeds the maximum area (5,000
2 2
mm , 7.75 inch ), it is automatically
adjusted to range.
❒ Up to four frequently used images
can be stored in memory.
A A A A
Make sure the machine is ready to
copy.
B B B B
Press the { { { { User Tools/Counter} } } } key.
C C C C
Press [Copier/Document Server Fea-
tures].
D D D D
Press [Stamp].
E E E E
Press [User Stamp].
F F F F
[Program / Delete Stamp].
Storing/Overwriting a user stamp
A Press [Program], and then press
the stamp number (1–4) you
want to program.
Note
❒ Stamp numbers displayed with
m next to them already have
settings.
❒ If the stamp number is al-
ready in use, the machine
will ask you if you want to
overwrite it. Press [Yes] or
[No].
Important
❒ You cannot restore the stamp
after it has been overwritten.
B Enter the user stamp name us-
ing the letter keys on the dis-
play panel. You can register up
to 10 characters.
Reference
"Entering Text", General Set-
AHD101S
tings Guide
C Press [OK].
D Enter the horizontal size of the
stamp using the number keys,
and then press [#].
E Press [Vertical], and then enter
the vertical size of the stamp
using the number keys, and
then press [#].
Copier Functions
2
55