Table of Contents
Advertisement
User Tools (System Settings)
❖ ❖ ❖ ❖ Feed Start Method
You can specify whether feeding starts automatically or after pressing the
{ { { { Start} } } } key.
Note
❒ Default: Auto
❖ ❖ ❖ ❖ Original Output
You can specify the original output tray to use when the power is turned on
or the { { { { Clear Modes} } } } key is pressed.
Note
❒ Default: Top
❖ ❖ ❖ ❖ Paper Thickness: Paper Tray
4
You can specify the thickness of paper loaded in the paper trays. If the image
on copies is scratched, or the paper wrinkles when using translucent paper,
you can change the setting to get better copies.
• Default: 2 (Plain Paper, Translucent paper, and Recycled Paper), 3 (Film )
The paper thickness can be set from 1 (Thicker) to 5 (Thinner).
Note
❒ Refer to the chart below when selecting the mode for the paper thickness.
Thickness
Paper type
Plain paper
Translucent
paper
Film
Recycled
paper
*1
Out of guarantee
58
1
2
2
2
110 g/m
90 g/m
(29.3 lb)
(23.9 lb)
(Standard
mode)
2
70 – 90 g/m
70 – 80 g/m
(18.6 – 23.9 lb)
(18.6 – 21.3 lb)
(Standard
mode)
* If the paper wrinkles when using mode 2,
try using mode 1.
0.07 mm –
0.07 mm –
0.095 mm
0.095 mm
(2.8 Mil – 3.7
(2.8 Mil – 3.7
Mil)
Mil)
2
2
110 g/m
90 g/m
(29.3 lb)
(23.9 lb)
(Standard
mode)
3
2
70 g/m
60 g/m
(18.6 lb)
(15.9 lb)
2
2
70 – 80 g/m
50 – 70 g/m
(18.6 – 21.3 lb)
(13.3 – 18.6 lb)
0.07 mm –
0.07 mm –
0.095 mm
0.095 mm
(2.8 Mil – 3.7
(2.8 Mil – 3.7
Mil) (Stan-
Mil)
dard mode)
2
70 g/m
60 g/m
(18.6 lb)
(15.9 lb)
4
5
2
2
50 g/m
or
less
(13.3 lb)
2
Hemmed
*1
paper
—
2
2
50 g/m
or
less
(13.3 lb)
Advertisement
Chapters
Table of Contents
Troubleshooting
