Ricoh 4800WD Operating Instructions Manual page 72

User Tools (System Settings)
❖ ❖ ❖ ❖ Fine Ratio Adjustment: Copier
Depending on paper type, environment, and humidity, copy paper can ex-
4
pand or shrink slightly. This means that the size of the copy and the original
do not match. If this happens, specify the vertical and horizontal correction
ratio. You can specify this setting for each paper type (plain, translucent, film
and recycled paper).
Note
❒ Default: 0.0%
❒ From –1.0% to 1.0% (in 0.1% increments)
❒ To set the Fine Ratio setting, measure the length of the original and the
copy image to calculate the ratio.
Calculating the Correction Value (%)
Example)
Original
Horiz.
To copy at the same size as the original
... For the example above:
Set the correction value (horizontal) to 0.8%.
60
ABB009S
Copy
Horiz.
correction value(%)
ZEDG010E