Copying; Basic Procedure - Ricoh 4800WD Operating Instructions Manual

Basic Procedure

Preparation
When User Code Authentication is
set, the screen for entering a user
code will be displayed. Enter your
user code (up to eight digits) using
the number keys, and then press
the { { { { #} } } } key.
Reference
For user codes, see "Registering
User Codes", General Settings
Guide.
When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, the authenti-
cation screen will be displayed.
Enter your login user name and
user password, and then press [Lo-
gin]. See "When the Authentication
Screen is Displayed", General Set-
tings Guide.
Note
❒ Consult the User Administrator
about your login user name and lo-
gin password.
A A A A
Make sure "d d Ready" is shown d d
on the display.
If any other function is displayed,
press the { { { { Copy} } } } key on the left of
the control panel.
❖ ❖ ❖ ❖ Initial copy display

2. Copying

B B B B
Make sure no previous settings
remain.
Note
❒ To clear settings, press the
{ { { { Clear Modes} } } } key.
C C C C
Select the output locations for
originals and copies, and then
prepare to use them.
Reference
p.7 "Before Copying"
D D D D
Make the necessary settings.
Note
❒ You can press the { { { { Check Modes} } } }
key to view the settings you
have made.
Reference
For details, see explanations of
each function.
If you use the { { { { Program} } } } key to
access the program function,
you can store and easily recall
the settings. See p.65 "Pro-
grams".
21