Ricoh 4800WD Operating Instructions Manual page 222

Management Based on Authentication and Access Control
You also need to register in the machine the functions available to the global
group members.
If global groups are not specified, users can use the available functions spec-
ified in [Default Group]. If global groups are specified, users not registered in
global groups can use the available functions specified in [Default Group]. By
default, all functions are available to [Default Group] members. Specify the lim-
itation on available functions according to user needs.
A Under "Group", press [Program / Change], and then press [*Not Programmed].
If the setting to be specified does not appear, press [T T T T Next].
B Press [Change], and then enter the group name.
C Select which of the machine's functions you want to limit.
D Press [OK].
G G G G
Press [OK].
H H H H
Press the { { { { User Tools/Counter} } } } key.
5
- - - - Creating the Server Certificate
This section explains how to create a Windows certificate for authentication. The
procedure given uses Windows 2000 as an example.
Note
❒ Before you can create a certificate, you need to install Internet Information
Service (IIS).
A In [Control Panel], click [Add/Remove Programs].
B Click [Add/Remove Windows Components] and install [Certificates Service].
C
On the [Start] menu, point to [Programs], [Administrative tools], and then click
[Internet Information Service].
D Right-click [Default Web Site] and click [Properties].
E Click the [Directory Security] tab.
F Click [Server Certificate...] in [Secure Communication] at the bottom of the dialog
box.
G Follow Web Server Certificates Wizards to create and install the server certif-
icate.
56