Ricoh 4800WD Operating Instructions Manual page 327

Note
❒ For example, if the search target
is the sales department of ABC
company, enter "dc=sales de-
partment, o=ABC". (In this ex-
ample, the description is for an
active directory. "dc" is for the
organization unit, and "o" is for
the company.)
❒ Search base registration may be
required depending on your
server environment. When reg-
istration is required, unspeci-
fied searches will result in error.
Check you server environment
and enter any required specifi-
cations.
C C C C
Press [OK].
To enter a port number
Specify the port number for commu-
nicating with the LDAP server. Speci-
fy a port that is compliant with your
environment.
A A A A
Press [Change] under [Port No.].
B B B B
Enter the port number using the
number keys, and then press [#].
Note
❒ When SSL is set to [On], the port
number automatically changes
to "689".
To start SSL communication
Use SSL to communicate with the
LDAP server.
A A A A
Press [On].
Note
❒ To use SSL, the LDAP server
must support SSL.
❒ When SSL is set to [On], the port
number automatically changes
to "689".
❒ SSL setting must be enabled on
this machine. For details, consult
your network administrator.
To set authentication
To make a search request to the LDAP
server, use the administrator account
for authentication.
For details about the administrator
account, see "To enter the user name
and password".
A A A A
Press [T T T T Next].
B B B B
Press [On] or [High Security] under
[Authentication].
Note
❒ Authentication settings must
comply with your server's au-
thentication settings. Check
your server settings before set-
ting this machine.
❒ [High Security] is available only
with LDAP Version 3.0.
❒ When [High Security] is selected,
the administrator password is
encrypted before it is sent to the
network. When [On] is selected,
the password is sent without
encryption.
LDAP Server Settings
35
2