Asu-Auto Setup; Bdr-Baud Rate - Christie Boxer 30 Technical Reference

ASU–Auto Setup
Automatically readjusts various video controls for the active video source to produce an optimal image
on screen.
Commands
Command Description
ASU Automatically readjusts various video controls for the active video source to
produce an optimal image on the screen. This command is only available if the
active display has a signal.
Examples
Perform auto setup on the active video source:
(ASU)
BDR–Baud Rate
Sets the baud rate for a serial communications port.
Commands
Command Description
BDR+PRTA? Returns the baud rate for the RS232-IN
port. (Read-only)
BDR+PRTA <value> Sets the baud rate for the RS232-IN port.
This command requires service level access.
(Saved value)
Examples
Verify that RS232-IN is set to 115200 bits per second:
(BDR+PRTA?)
Result:
(BDR+PRTA!006 "115200")
Set the baud rate on port A to 115200 bits per second:
(BDR+PRTA 6)
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
1 = 2400
2 = 9600
3 = 19200
4 = 38400
5 = 57600
6 = 115200 (Default baud rate on each
port)
Values
—
17