Guiding Capillaries And Tubing Through The System - Thermo Scientific Vanquish VH-P10 Operating Manual

5 • Installation
5.6.2

Guiding Capillaries and Tubing Through the System

Tubing Chase, Tubing Guide, Tubing Bracket
Page 60
Flow connections between the modules of the Vanquish system are
guided through either the tubing chase in the devices or the guide holes
or capillary clips of the devices.
To guide certain tubes and lines (solvent tubing, wash liquid tubing,
detector waste line) from the top module to the bottom module in the
Vanquish system stack, the stackable modules have a tubing chase on
the inside right.
The tubing chase provides four tubing guides. Each guide can hold up to
three tubes or lines.
In each module, push the tube (or line) into the appropriate guide (see
picture).
Figure 10: Tubing chase with tubing guides (left: view from inside, right:
view from top)
No. Use for
1 Solvent tubing (up to three solvent lines, preferably routed to the upper
degas chambers)
2 Solvent tubing (up to three solvent lines)
3 Wash liquid tubing (seal wash, autosampler needle wash)
4 Detector waste line
Vanquish Pumps (VH-P10) Operating Manual