Predictive Performance - Thermo Scientific Vanquish VH-P10 Operating Manual

7 • Maintenance and Service
7.4.4

Predictive Performance

Page 124
The Chromeleon software supports functions for estimating the lifetime
of consumables and for monitoring and recording service and
qualification information about the device. These functions, which are
called Predictive Performance, allow you to schedule maintenance
procedures based on the actual operating and usage conditions of the
device.
On special wellness, service, and qualification panels, you can define
intervals for replacing components that are subject to wear or stress and
for service procedures or qualification procedures. In addition, you can
set limits to alert you before and when the replacement, service, or
qualification is due. Color-coded bars on special panels provide visual
feedback, allowing you to easily check and monitor the status. If a
warning limit was set, a message in the Chromeleon Audit Trail alerts
you when the action is due.
Some counters can be reset to zero after the required action was
performed. To keep the Predictive Performance information up-to-date,
consider resetting the counter when a maintenance, service, or
qualification procedure has been performed. For more information,
refer to the Chromeleon Help.
The list shows the commands to reset the most important Predictive
Performance counters for the pump. Consider resetting these
parameters after performing the related maintenance procedure:
•
CheckValvesServiceDone
For each pump head, a common counter is available for all check
valves (inlet check valves and outlet check valves).
•
InlineFilterChanged
If you have installed the static mixer instead of the inline filter,
consider resetting this counter after mixer installation or mixer
replacement.
•
PistonsChanged
For each pump head, a common counter is available for both
pistons.
•
SealsChanged
For each pump head, a common counter is available for all piston
seals in the pump head.
•
QualificationDone
•
ServiceDone
Vanquish Pumps (VH-P10) Operating Manual