Safety Precautions; General Safety Information - Thermo Scientific Vanquish VH-P10 Operating Manual

2 • Safety
2.3

Safety Precautions

2.3.1

General Safety Information

Safety Standard
Page 22
All users must observe the general safety information presented in this
section and all specific safety messages and precautionary statements
elsewhere in this manual during all phases of installation, operation,
troubleshooting, maintenance, shutdown, and transport of the pump.
If the pump is used in a manner not specified by Thermo Fisher Scientific,
the protection provided by the pump could be impaired. Observe the
following:
•
Operate the pump only within its technical specifications.
•
Use only the replacement parts and additional components, options,
and peripherals specifically authorized and qualified for the pump by
Thermo Fisher Scientific.
•
Perform only the procedures that are described in this operating
manual and in supporting documents for the pump.
Follow all instructions step by step and use the tools recommended
for the procedure.
•
Open the enclosure of the pump and other components only if
specifically instructed to do so in this manual.
•
Thermo Fisher Scientific cannot be held liable for any damage,
material or otherwise, resulting from inappropriate or improper use
of the pump. If there is any question regarding appropriate usage,
contact Thermo Fisher Scientific before proceeding.
This device is a Safety Class I instrument (provided with terminal for
protective grounding). The device has been manufactured and tested
according to international safety standards.
Vanquish Pumps (VH-P10) Operating Manual