Connecting The Pump And Autosampler - Thermo Scientific Vanquish VH-P10 Operating Manual

5 • Installation
5.6.7

Connecting the Pump and Autosampler

Parts required
Follow these steps
Page 76
Capillary to connect the pump to the autosampler
1. Guide the connecting capillary through the guide holes in the
housings of both, the pump and autosampler.
Figure 26: Guide holes in the autosampler and pump (left: view from
autosampler; right: view from pump)
No. Description
1 Capillary connecting the pump and autosampler:
1a Capillary end connected to the autosampler injection valve
1b Capillary end to be connected to pump outlet
2 Guide holes in autosampler housing and pump housing:
2a Guide hole in autosampler housing (view from above)
2b Guide hole in pump housing (view from below)
2. In the pump, connect the capillary to the pump outlet.
3. In the autosampler, connect the capillary to the injection valve
(port 1).
Vanquish Pumps (VH-P10) Operating Manual