7.7
Check Valves
7.7.1
Replacing the Inlet Check Valves
When
Parts required
Additional items required
Vanquish Pumps (VH-P10) Operating Manual
Follow the sequence of steps for the maintenance procedure that you
want to perform:
•
To replace the inlet check valves, see the next section.
•
To replace the outlet check valves, see
•
To clean the check valves, see
The picture shows the parts that must be removed.
Figure 65: Replacing the inlet check valves
Damage of check valve or leaky check valve
Inlet check valve
•
Solvent suitable for purging to flush out harmful substances
•
Solvent suitable for your application
7
•
Maintenance and Service
section 7.7.2, page
section 7.7.3, page
158.
No.
Description
1
Pump head inlet assembly
2
Inlet check valves
3
Pump head
157.
Page 155