About This Manual - Thermo Scientific Vanquish VH-P10 Operating Manual

1 • Using this Manual
1.1

About this Manual

Page 12
This manual describes the functional features and operating principle of
your Vanquish™ pump and provides instructions for installation, set up,
start up, shut down, operation, maintenance and troubleshooting.
The layout of this manual is designed to provide quick reference to the
sections of interest to the user. To obtain a full understanding of your
pump, read this manual thoroughly.
This manual also contains safety messages, precautionary statements,
and special notices that can prevent personal injury, damage to the
pump, or loss of data when followed properly.
Note the following:
•
The pump configuration may vary; therefore, not all descriptions
necessarily apply to your particular pump.
• If some detail applies to only one model or variant, the model or
variant is identified by name.
•
Illustrations in this manual are provided for basic understanding.
They can vary from the actual model of the pump or component.
However, this does not influence the descriptions. No claims can be
derived from the illustrations in this manual.
The descriptions in this manual assume that the pump is installed in the
Vanquish system stack. If this is not the case, additional hardware is
required and must be ordered separately. The information in this
manual applies correspondingly.
Vanquish Pumps (VH-P10) Operating Manual