Unpacking And Moving - Thermo Scientific Vanquish VH-P10 Operating Manual

4 • Unpacking and Transport
4.1

Unpacking and Moving

Damaged Packaging, Defective on Arrival
Unpacking the Pump
Tools required
Follow these steps
Page 42
Inspect the shipping container for signs of external damage and, after
unpacking, inspect the pump for any signs of mechanical damage that
might have occurred during shipment.
If you suspect that the pump may have been damaged during shipment,
immediately notify the incoming carrier and Thermo Fisher Scientific
about the damage. Shipping insurance will compensate for the damage
only if reported immediately.
CAUTION—Heavy Load, Bulky Device
The pump is too heavy or bulky for one person alone to handle safely. To
avoid personal injury or damage to the pump, observe the following
guidelines:
•
Physical handling of the pump, including lifting or moving, requires a
team effort of two persons.
•
Use the carrying handles that were shipped with the pump to move
or transport the pump. Never move or lift the pump by the front
doors. This will damage the doors or the pump.
Screwdriver, Torx® T20
1. Place the shipping container on the floor and open it.
2. Remove the ship kit from the shipping container.
3. Remove the pump from the shipping container:
Grasp the pump by the carrying handles.
Slowly and carefully, lift the pump out of the shipping container.
Vanquish Pumps (VH-P10) Operating Manual