Appendix F - Emc Emissions And Immunity - MAGSTIM Rapid2 Operating Manual

Hide thumbs Also See for Rapid2:
Table of Contents

Advertisement

APPENDIX F – EMC EMISSIONS AND IMMUNITY
Guidance and Manufacturer's Declaration – Electromagnetic Emissions
The Magstim Rapid
The customer or the user of the equipment should assure that it is used in such an environment.
Emissions Test
RF emissions
EN60601-1-2
RF emissions
EN60601-1-2
Harmonic
Emissions
EN60601-1-2
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
The Magstim Rapid
disturbances are controlled. The customer or the user of the Magstim Rapid
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Magstim Rapid
according to the maximum output power of the communications.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
© The Magstim Company Limited
2
System is intended for use in the electromagnetic environment specified below.
Compliance
Group 1
Class A
Class A
(by equipment
type)
Complies
Guidance and Manufacturer's Declaration – Electromagnetic Immunity
2
System is intended for use in an electromagnetic environment in which radiated RF
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
3,5
]  P
d = [
V
1
Where V
= 3
1
0,117
0,369
1,167
3,689
11,667
Electromagnetic environment - guidance
2
The Magstim Rapid
System must emit electromagnetic
energy in order to perform its intended function. Nearby
electronic equipment may be affected.
2
The Magstim Rapid
System is suitable for use in all
establishments other than domestic and those directly
connected to the public low-voltage power supply network that
supplies buildings used for domestic purposes.
2
System as recommended below,
m
80 MHz to 800 MHz
3,5
]  P
d = [
E
1
Where E
= 3
1
0,117
0,369
1,167
3,689
11,667
67
Magstim Rapid²
Operating Manual
2
System can help prevent
800 MHz to 2,5 GHz
7
]  P
d = [
E
1
Where E
= 3
1
0,233
0,738
2,333
7,379
23.333
MOP03-EN-03

Advertisement

Table of Contents
loading

Table of Contents