MAGSTIM Rapid2 Operating Manual page 12

3.1.2.10
With the Magstim Rapid² system turned on, air is drawn through slots at the bottom of the instrument
and expelled through the fan outlet. There should be no obstructions placed closer than 50mm to the
fan outlet.
3.1.2.11
The HV cable is connected to this connector to interconnect the high voltage power between the
mainframe and the PSU.
Note: High voltage can be present on this connector.
3.1.2.12
2
The Rapid
system's compliance with EN 60601-1-2 regarding Electro-Magnetic emissions. The strap is fitted
between the stimulator and the PSU.
3.1.2.13
Mains input port on the Standard Rapid² PSU and Super Rapid² PSU.
© The Magstim Company Limited
Cooling Fan Outlet (10)
HV Power Entry Socket (11)
Earth Strap (12)
system must only be used when fitted with the supplied earth straps, this is to maintain the
Mains input to PSU* (13)
9
Magstim Rapid²
Operating Manual
MOP03-EN-03