Table of Contents
Advertisement
Switch the printer on via the green button on the left hand side of the printer. The 'Power' LED
4.
should now be illuminated green.
5.
To load paper, push the cover buttons on the side of the printer; this will open the Roll Paper
Cover.
6.
Align the edges of the paper roll against the paper holders and push down gently.
7.
Pull the paper through and close the cover. The printer is now ready to be used.
© The Magstim Company Limited
Serial
Port
Figure 4.8: Connecting the printer to the Rapid² system
On/Off
Button
Cover Open
Button
Figure 4.9: Printer
24
Magstim Rapid²
Operating Manual
Optical RS/232
Interface cable
Roller Paper
Cover
Feed
MOP03-EN-03
Advertisement
Table of Contents
