Table of Contents
Advertisement
4.4.1.4
Press the Time Cursors button (green when
selected) to access the Time Cursors panel.
Status: Select the Status window to turn the
Latency Cursors on and off. The default setting
is OFF.
Channel 1 Latencies: Select L1 or L2 to
activate a cursor for adjustment.
cursors are active, their current screen time
value will be displayed on the trace window.
The trace of the selected cursor can be moved
using the Rotary Control Knob, for example to
identify the time of an event.
Channel 2 Latencies: Select L1 or L2 to
activate a cursor for adjustment. When the cursors are active, their current screen time value will be
displayed on the trace window. The trace of the selected cursor can be moved using the Rotary
Control Knob, for example to identify the time of an event.
4.4.1.5
Press the Amplitude Cursors button (green
when selected) to access the Time Cursors
panel.
Status: Select the Status window to turn the
Amplitude Cursors on and off. The default
setting is OFF.
Auto Peak: Select the Auto Peak window to
turn auto peak on and off. The default value is
ON. With this option ON, each time a new set of
MEP waveforms are displayed, the cursors will
automatically move to the peak values for each
trace. With the option OFF, the amplitude
cursors will remain at their previous values.
Amplitude Cursors must be ON for this option to
become available.
Channel 1: This window allows the Amplitude Cursor on Channel 1 to be moved, for example to mark
peaks. Amplitude Cursors must be ON for this option to become available.
Channel 2: This window allows the Amplitude Cursor on Channel 2 to be moved, for example to mark
peaks. Amplitude Cursors must be ON for this option to become available.
Note, in Repetitive Mode or Session Mode, the Amplitude Cursor positions set in Single Pulse Mode
will remain marked by the Amplitude Cursor on the trace.
© The Magstim Company Limited
Time Cursor Panel
Amplitude Cursors Panel
When the
Figure 4.15: Time Cursors Panel Window
Figure 4.16: Amplitude Cursors Panel Window
29
Magstim Rapid²
Operating Manual
MOP03-EN-03
Advertisement
Table of Contents
