Table of Contents
Advertisement
4.
Connect the HV cable(s) provided (See Figure 4.2 for reference).
Standard Rapid² & Super Rapid²: Connect the HV cable from the PSU to the rear panel of the
Main Frame.
Rapid² Plus²: Connect two of the HV cables from the two the PSUs to the two HV inputs
(indicated by the
HV cable between the HV output (indicated by the
Plus1 to the HV input on the rear of the Main Frame.
5.
Connect the 10A link leads provided (See Figure 4.2 for reference).
Standard Rapid² & Super Rapid²: Connect the 10A link lead between the PSU Module and the
stimulator Main Frame. Please refer to section 3 for reference.
Rapid² Plus²: Connect a 10A link lead from the Dual PSU Module to the Magstim Plus1 and from
the Magstim Plus1 PSU module and the stimulator Main Frame. Please refer to section 3 for
reference.
© The Magstim Company Limited
Figure 4.1: Attaching the coil holder to Rapid² Plus¹ System
symbols) located on the rear panel of the Magstim Plus1. Connect the third
Figure 4.2: Colour coded cable connection (Left Rapid²/Super Rapid, Right Rapid² Plus¹)
symbol) on the rear panel of the Magstim
20
Magstim Rapid²
Operating Manual
MOP03-EN-03
Advertisement
Table of Contents
