Table of Contents
Advertisement
3.3.1.5
All selections are made via the touch-screen. To select, touch the centre of the button symbol next to
the desired menu option. Do not press hard, or use a sharp or pointed object to make the selection,
as this may damage the touch screen.
Button
In the set-up screens, all selectable items are coloured in pale blue; white items are non-selectable.
The Rotary Control Knob can only be used to change parameters already selected. Details regarding
Selectable
the contents and operation of the UI Screens are given in Sections 4.4
Window
Note: If the UI is not used for 30 minutes it will go into a standby condition. In standby, the screen will
appear blank and the blue LED in the upper right corner of the front bezel will pulse. Touch the screen
Non-Selectable
to restore the UI.
Window
Rear view
3.3.2
(2)
3.3.2.1
The Printer is attached to the User Interface via an Optical/RS232 Interface Cable which slides into
place on the right hand side at the rear of the UI.
3.3.2.2
This connector is situated on the rear of the UI, and has 2 rows of pins. The connector links the UI to
the Magstim Rapid
3.3.2.3
This socket is situated on the rear of the left hand side panel of the UI. This allows connection of an
SD Card. This removable memory storage facility enables transfer of data between the UI and
external devices, such as PCs.
© The Magstim Company Limited
Touch-Sensitive Screen/ System Display * (5)
(1)
Figure 3.10: Detailed front panel of Rapid² UI.
Printer Connection* (1)
25 Way D-Type Connector* (2)
2
as shown in figures 3.4 and 3.8.
SD Card Insertion Point* (3)
16
Magstim Rapid²
Operating Manual
(3)
(4)
(5)
(6)
(7)
MOP03-EN-03
Advertisement
Table of Contents
