Table of Contents
Advertisement
To Delete a File:
1. Select the file in the Local Store panel using the Rotary Control Knob.
2. Press 'Delete'
3. The on screen prompt will ask 'Are you sure you wish to delete selected file?'
4. Press 'Yes' or 'No'
Managing Single Pulse Mode, Repetitive Mode, and Session Mode Files:
1. To save settings created in, for example, Single Pulse Mode, go to File Maintenance.
2. Press New.
3. Select the Local Store Panel and add the new file name using the keyboard.
4. Press Save on the keyboard.
5. Move the arrow to the new file name using the Rotary Control Knob.
6. Press Save As.
7. The prompt 'Are you sure you wish to overwrite the selected file?' will appear whether the file
currently contains information or not.
8. Select 'Yes'
9. Use the on-screen buttons to navigate back to, for example, Single Pulse Mode.
SD Card
4.4.7
4.4.7.1
To save a stored file onto an SD Card, insert the SD Card into the socket situated on the side of the UI
(see Section 3.3). Select the 'File Maintenance' screen and select the 'Local Store' panel. Select a file
by turning the Rotary Control Knob until the arrow points at the chosen file. Press the 'Export' Button.
The screen will display the command 'Please wait, Data Transfer in Progress' the file will appear in the
'Memory Card' store panel. The file is now saved onto the SD Card.
The UI only supports the short DOS file name convention of 8 characters for the file name and 3
characters for the file extension when reading from or writing to the SD Card. Long file names on the
UI will automatically be reduced down to 8 letters for export purposes onto the card. All Files exported
from the UI onto the card will have the file extension 'MRF.' When the file is returned to the UI via the
SD Card, its original file name will be displayed. See Appendix C for saved data format.
2
The Rapid
The UI can only be used to read or to write a file from the card. It can not format, create directories or
delete any data stored on the card
4.4.7.2
Make sure an SD Card Reader is connected to the system. Insert the SD card.
1. Using Windows Explorer select the drive associated with the SD card.
2. Select the Format option.
3. Under File System select the FAT option.
4. Follow the instructions on screen.
© The Magstim Company Limited
Saving to the SD Card
is only compatible FAT 16 formatted SD cards.
Formatting an SD Card with a PC
42
Magstim Rapid²
Operating Manual
MOP03-EN-03
Advertisement
Table of Contents
