Skipping Current System Configuration - H3C SR6604 Installation Manual

Flash Size
cfa0 Size
BASIC CPLD Version
EXTEND CPLD Version : 133.0
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl + B within three seconds after the "Press Ctrl+B to enter extended boot menu..."
2.
prompt message appears.
BootWare password: Not required. Please press Enter to continue.
Press Enter and read the password recovery capability state message displayed before the
3.
EXTEND-BOOTWARE menu.
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Skip Authentication for Console Login
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9):

Skipping current system configuration

Reboot the router to access the EXTEND-BOOTWARE menu, and then enter 6.
1.
The current mode is password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
: 4MB
: 244MB
: 131.0
: Ver.B
85
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|