Table of Contents
Advertisement
TCP/IP Panel
The TCP/IP panel connects PCS to a specific device through Ethernet.
Figure 22.
1.
Click the TCP/IP tab (see figure 22,
2.
In the IP Address field (
3.
Enter the device password in the Password field (
NOTES:
•
•
4.
In the Telnet Port field (
5.
Click the Connect button (
Offline Device Preview
Opening a new device tab for an offline device displays the interface and configuration
options for the chosen model without connecting to it. However, settings cannot be
changed.
To open a device tab:
1.
In the Start-up drop-down list, select
New Configuration File. The
New Configuration File dialog
box opens (see
page).
TCP/IP Panel
), enter the IP address of the desired device.
2
Select the Show Password check box (see
characters.
The factory configured passwords for all accounts on this enclosure have been
set to the enclosure serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password (see
page 43 to change a password).
), enter the Telnet port of the desired device.
4
). A new device tab opens.
6
figure 24
on the next
PowerCage 401 Enclosure • Configuration Software
).
1
).
3
) to display the password
5
Figure 23.
Start-up Drop-Down List
Passwords
on
35
Advertisement
Table of Contents
