4 x 2.5'' front drives
Use the section to understand the cable routing for signal cable connections for 4 x 2.5-inch drive
backplanes.
Under the configuration of 4 x 2.5-inch front drives, your server supports the following front backplanes:
4 x 2.5'' SAS/SATA backplane
Use this section to understand the SAS/SATA backplane cable routing for server model with four 2.5-inch
front drives.
To connect cables for a 7mm drive backplane, refer to
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to
backplane power" on page
To connect signal cables for a backplane for standard 4 x 2.5-inch front drives, refer to the following cable
routing scenarios depending on your server configuration:
•
"Cable routing for onboard configuration" on page 367
•
"Cable routing with an SFF HBA/RAID adapter" on page 368
•
"Cable routing for 4 x 2.5-inch front SAS/SATA drive bays with an 8i CFF RAID adapter (Gen 3) installed"
on page 369
ThinkSystem SR630 V3 User Guide
366
274.
"7mm drive backplane" on page
270.
"Cable routing for